Allenheath Scepter USER GUIDE Manuale Utente Scaricare il pdf (Pagina 13)

Audio Owner Manual

Section 2

LINE

L-J

PAD

AUX SENDS

-0+

MID

III

EQ IN

FRONT PANEL CONTROLS.

INPUT CHANNEL

10.

GAIN

Adjusts the gain of the input pre-amplifier to suit input levels.

Control range is

+18

+66dB

(mic) and -4 to

+43dB

(line).

LINE

Selects between Microphone and Line input sources. With the

switch engaged, Line input is selected.

PAD

When selected, reduces the input signal level by approximately

16dB.

AUX SENDS A,B,C,D

Allows the operator to create up to four different mixes to be

used as foldback, effects or cue mixes as desired. The

SCEPTER mixer is delivered from the factory with AUX SENDS

A and B set for PRE-FADER operation. AUX SENDS C and D

are set for POST-FADER operation. Internal jumpers are

provided to allow custom configuration of all Aux buses.(SEE

USER OPTIONS)

HIGH FREQUENCY EQUALIZER

Boosts or cuts the High Frequencies by up to 16dB at the

corner frequency of

1OkHz

with Shelving characteristics.

MID FREQUENCY SWEEP CONTROL

Selects the center frequency affected by the mid frequency gain

control. Continuously variable from 250Hz to 6

kHz.

MID FREQUENCY EQUALIZER

Boost or cuts the Mid Frequency by up to 12dB. Approximately

1 octave around the center frequency with Peak/Dip

characteristics

LOW FREQUENCY EQUALIZER

Boost or cuts the Low Frequencies by up to 16dB at the corner

frequency selected by the Low Frequency Select Switch.

LOW FREQUENCY SELECT SWITCH

Selects the corner frequency of the Low Frequency Equalizer

between

12OHz(Up)

and

GOHz(Down).

With this switch engaged, the EQ section is active in the

channel. With the switch released the EQ section is bypassed.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

Commenti su questo manuale

Nessun commento

Allenheath Scepter USER GUIDE Manuale Utente Pagina 13

Commenti su questo manuale

Prodotti e manuali riguardandi Pannello di controllo Allenheath Scepter USER GUIDE